AC1000
Replacement Safety Key
Fits all RIDGID Stationary Tools and Edge Belt/Spindle Sander.
|
AC1021
Delux Miter Gauge
With adjustable stops at 0°, 45° left and right. For use with RIDGID BS1400 and EB4424.
|
AC1022
Miter Gauge Hold Down
Clamps the workpiece to the miter gauge. Fits 5/16"-18 threaded hole in the top of the head and a 3/4" x 3/8" bar. Use with RIDGID TS2412 and TS2400.
|
AC1025
7" Dado/Molding Insert
For use with 7" Dado blade or molding head cutter. Use with RIDGID TS2424, TS2412, and TS2400.
|
AC1030
8" Dado/Molding Insert
For use with 8" Dado blade or molding head cutter. Use with RIDGID TS2424, TS2412, and TS2400.
|
AC1035
Zero Clearance Table Saw Insert
Use with RIDGID TS2424, TS2412, and TS2400, TS3612.
|
AC1036
Retro Fit Rip Fence
Provides 36" right and 12" left rip capacity. Saws must be cast iron with 27" table front to back and 10" minimum wide extension.
|
AC1050
Heavy Duty Caster Platform
Provides easy mobility of RIDGID Table Saws. Use with RIDGID TS2424, RS1000, and WL1200.
|
AC1060
Storage Hooks
Used to store rip fence, miter gauge, or other accessories on-board your tool. Use with RIDGID TS2412 and TS2424.
|
AC1098
Table Saw Dust Collector
Includes connector and 2-1/2" x 7" hose. Use with RIDGID TS2424 and TS2412.
|
AC1099
Radial Saw Dust Collector
Fits all RIDGID and Craftsman@ 10" full-size stationary radial saws. Works with the blade in any rip or crosscut position. Keeps your work area clear of sawdust and wood chips. Collect dust at the source. Reduces clean-up time. Attaches to your radial saw and connects to your RIDGID Wet/Dry Vac or Dust Collection System. Use with RIDGID RS1000.
|
AC2008
7" Triple-Cutter Molder Head
Allows your table or radial saw to do joining, planing, and shaping cuts. For use on all RIDGID table and radial saws and most other table and radial saws with a 5/8" arbor. Includes the 4 cutter sets shown - AC2101, AC2103, AC2111, AC2112. Use with RIDGID RS1000, TS2424, TS2412, and TS2400.
|
AC2010
Molding Head Guard
For us on all RIDGID and CRAFTSMAN (prior to 1999) Radial Saws except CRAFTSMAN models 2930, 2931, and 2932. Guard is used with molding heads, dados and rotary planers up to 8" cutter diameter. Use when standard guard cannot be used for straight edge shaping, rabbetting, cabinet door molding, and surface planing. Use with RIDGID RS1000.
|
AC2020
Drill Chuck
Fits any arbor with 1/2"-20 threads. 1/2" bit capacity, hardened jaws provide a wear resistant gripping surface for accurate alignment of bits, 5/64" up to 1/2" diameter shanks. Includes off-set "T" type chuck key with spring pin. Use with RIDGID RS1000 and WL1200.
|
AC2030
Sanding Drum
For use with radial saws, drill presses. For use with drill press, the AC6010 arbor must be used. 2-1/4" diameter abrasive sleeve over expandable rubber drum. Use with RIDGID RS1000, WL1200, and DP1500.
|
AC2040
Sanding Wheel
10" - 5/8" arbor. Allows flat, precise disc sanding with your table or radial saw. Use with RIDGID RS1000.
|
AC2101
Cutter Bit Set
|
AC2102
Cutter Bit Set
|
Use with RIDGID RS1000, TS2424, TS2412, and TS2400.
|
Use with RIDGID RS1000, TS2424, TS2412, and TS2400.
|
AC2103
Cutter Bit Set |
AC2104
Cutter Bit Set |
Use with RIDGID RS1000, TS2424, TS2412, and TS2400.
|
Use with RIDGID RS1000, TS2424, TS2412, and TS2400.
|
AC2105
Cutter Bit Set |
AC2106
Cutter Bit Set |
Use with RIDGID RS1000, TS2424, TS2412, and TS2400.
|
Use with RIDGID RS1000, TS2424, TS2412, and TS2400.
|
AC2107
Cutter Bit Set |
AC2108
Cutter Bit Set |
Use with RIDGID RS1000, TS2424, TS2412, and TS2400.
|
Use with RIDGID RS1000, TS2424, TS2412, and TS2400.
|
AC2109
Cutter Bit Set |
AC2110
Cutter Bit Set |
Use with RIDGID RS1000.
Not for use with table saws.
|
Use with RIDGID RS1000.
Not for use with table saws.
|
AC2111
Cutter Bit Set |
AC2112
Cutter Bit Set |
Use with RIDGID RS1000, TS2424, TS2412, and TS2400.
|
Use with RIDGID RS1000, TS2424, TS2412, and TS2400.
|
|
|
AC3000
|
AC6005 |
Miter Saw Clamp Kit
|
Mortising Kit
|
Provides added workpiece stability. Use with RIDGID MS1050 and MS1060 only.
|
Convert your RIDGID
Drill Press into an accurate mortising machine. Use with RIDGID Mortise Chisels (sold separately)
to cut square holes for various mortise and tenon joints. Includes storage case.
Also fits DELTA models: 11-980; 11-990; 11-090; 14-040; 14-070; 17-900; and 17-925 drill presses.
Also fits SEARS models: 113.213130; 113.213150; 113.213170; 113.213840; 113.213850; and 113.213870 drill presses.
Use with RIDGID DP1500. |
|
|
AC5001
|
AC5005
|
Band Saw Rip Fence
|
Riser Block
|
| Contents: Rip Fence, Front and Back Rails,
Mounting Hardware and Instructions. Use with RIDGID BS1400. |
Provides additional 6" depth of cut. Use with RIDGID BS1400.
|
|
|
AC5006
|
AC5007
|
Sanding Belt
|
Cool Blocks™
|
92 1/2" replacement sanding belt. Use with RIDGID BS1400.
|
Replacement blade guides. Use with RIDGID BS1400.
|
|
|
AC6006 - AC6009
|
AC6010 |
Assorted Mortising Chisel and Bit
|
Work Arbor
|
Use with RIDGID Mortising Kit (AC6005 sold separately) to cut square holes for various
mortise and tenon joints:
- AC6006 - 1/4" Mortising Chisel and Bit
- AC6007 - 5/16" Mortising Chisel and Bit
- AC6008 - 3/8" Mortising Chisel and Bit
- AC6009 - 1/2" Mortising Chisel and Bit
Use with RIDGID DP1500.
|
Convert your RIDGID
For use with RIDGID DP1500 - 15" Drill Press or
any stationary drill press. 1/2" - 20 Threaded Arbor with a 1/2" diameter shaft. Mounts
buffing wheels, wire brush wheels, and drum sanders into drill chuck for added versatility. /font>
|
AC7001 - AC7015
Assorted Sanding Drum Sleeves -
2-pk Sandpaper Sleeves
- AC7001 - 1/2" Fine Sandpaper Sleeve
- AC7002 - 1/2" Medium Sandpaper Sleeve
- AC7003 - 1/2" Coarse Sandpaper Sleeve
- AC7004 - 3/4" Fine Sandpaper Sleeve
- AC7005 - 3/4" Medium Sandpaper Sleeve
- AC7006 - 3/4" Coarse Sandpaper Sleeve
- AC7007 - 1" Fine Sandpaper Sleeve
- AC7008 - 1" Medium Sandpaper Sleeve
- AC7009 - 1" Coarse Sandpaper Sleeve
- AC7010 - 1-1/2" Fine Sandpaper Sleeve
- AC7011 - 1-1/2" Medium Sandpaper Sleeve
- AC7012 - 1-1/2" Coarse Sandpaper Sleeve
- AC7013 - 2" Fine Sandpaper Sleeve
- AC7014 - 2" Medium Sandpaper Sleeve
- AC7015 - 2" Coarse Sandpaper Sleeve
|
|
|
|
AC8010
|
4" x 24"
|
Work Arbor
|
1/2-20 Threaded Arbor with a
#1 Morse Taper. Secures buffing wheels and drum sanders to headstock
and drill chuck to tailstock or headstock. For use with RIDGID WL1200 12" Wood Lathe and any other wood lathe with a #1 morse taper.
|
|
|
AC8020
|
AC8040
|
Live Center
|
4" Face Plate
|
No. 1 Morse Taper, 60° Taper Point. For use with WL1200.
|
3/4"-16 Thread Connection. Holds up to an 8"
diameter bowl. For use with RIDGID WL1200.
|
|
|
AC8060
|
AC8070
|
6" Face Plate
|
Bowl Turning Tool Rest
|
3/4"-16 Thread Connection. Holds up to an 12"
diameter bowl. For use with RIDGID WL1200.
|
Cast Iron with 7/8" diameter shank. Replaces
regular tool rest for face plate and bowl turning. For use with RIDGID WL1200.
|
|
|
AC8600
|
AC8601
|
6-1/8" Jointer Knives
|
Push Blocks - 2 Pack
|
Pack of 3 replacement knives. Use with RIDGID JP0600.
|
Provide added workpiece control. Use with RIDGID JP0600.
|
|
|
|---|
AC8602
|
AC8630
|
Dust Collection Kit
|
Replacement Planer Knives
|
Includes hose, over center clamps, and
4" x 2-1/2" reducer. Use with RIDGID JP0600.
|
Reversible
for extended life. Fits RIDGID TP1300 Thickness Planer.
|
|
|
AC8640
|
AC9910
|
Dust Collector
|
Universal Leg Set
|
Single knob included. 2 1/2" and 4" hose connection. Use with RIDGID TP1300.
|
Fits all RIDGID benchtop tools and most other benchtop
brands. Adjustable height from 24" to 34". Adjustable footprint from
24" square to 32" square. Works with RIDGID MS1250, MS1050, TS2400, TP1300, SS1650, and EB4424.
|
|
|
AC9920
|
AC9930
|
Herc-U-Lift™ Caster Set
|
Work-N-Haul It™
|
Used on RIDGID and Craftsman® belt drive table saws.
Patented one step design allows easy 360° mobility. Allows saw to rest
on all four legs when disengaged. Works with RIDGID TS2412.
|
Wide Footprint and non-skid-feet for custting stability.
Stands upright like a two-wheel cart even with your tool attached
which means it requires less floor space to store. Large 27" x 24" x 22" high
work surface. Works with RIDGID TS2400, MS1250, and MS1050.
|
AC9933
Flip Top Stand
The All New Flip Top Stand™ Provides Superior
Support of Work Pieces as they are Cut, Drilled, Planed, Sanded, Etc.
|
AC9950
Herc-U-Lift PLUS™
Easy 360º Mobility for Any RIDGID® Stationary Tool with an Open Leg Set -
Also Fits AC9910 Universal Leg Set and Some Craftsman Stationary Tools
|
